FYH NAPK212-38 bearing units

r1 min.:0.6 mm; Basic dynamic load rating C:156 kN; α:6 °; l3 min.:68 mm; Basic static load rating C0:270 kN; l7 min.:60 mm; C1 max.:31 mm; l4 max.:219 mm; d4 ≈:70 mm; Material constant KM:330;

ra max.:1 mm; Basic static load rating C0:93 kN; D:110 mm; rb max.:1 mm; r3,4 min.:1 mm; da min.:74.6 mm; Calculation factor kr:0.1; Mass bearing:0.53 kg; db min.:82 mm; da max.:78 mm;

Basic Static Radial Load Rating Co:176000 N; d:80.000 mm; B:48.00 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Dynamic Radial Load Rating C:176000 N; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:3400 rpm; D:200.0000 mm;

Specific dynamic load factor K:100 N/mm²; Design (sliding contact surface combination):Steel/steel; b1:8 mm; Lubricant:Regular relubricatio; Material constant KM:330; C:52.375 mm; da max.:76.7 mm; Basic static load rating C0:1270 kN; B:64.643 mm; d:63.5 mm;

B:272 mm; Calculation factor e:0.35; Basic dynamic load rating C:7683 kN; D1 ≈:676 mm; r1,2 min.:7.5 mm; Basic static load rating C0:11600 kN; Da max.:728 mm; d:420 mm; K:12 mm; d2 ≈:500 mm;

B:70 mm; M2:76 mm; Spring washer in accordance with DIN 128:A 24; M1:7 mm; M3:26 mm; Hexagonal head bolt:M 24x50; M:21 mm; Mass locking clip:0.41 kg;

Pu:4.410 kN; s:1.4 mm; Static (Coa):36.2 kN; r1s (min):1.1 mm; Dynamic (Ca):43 kN; F:34 mm; rs (min):1.1 mm; d2:25 mm; B:17 mm; b:4 mm;

B:28.00 mm; Basic Dynamic Radial Load Rating C:81800 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; Fillet Radius ra:2.00 mm; Accessories:Two Seals; d:110.000 mm; Basic Static Radial Load Rating Co:73500 N

Grease Speed Rating n1:7500 rpm; Fillet Radius ra:1.50 mm; B:21.00 mm; Oil Speed Rating n2:10000 rpm; Basic Static Radial Load Rating Co:24500 N; Basic Dynamic Radial Load Rating C:39700 N; d:35.000 mm; D:80.0000 mm; Fillet Radius rb:1.00 mm;

P60°:669 kN; Bearing limiting speed:1600 r/min; R1:163.512 mm; H1:250.825 mm; Adapter sleeve assembly:SNP 3056x9.15/16; P150°:222 kN; P180°:267 kN; RG:1 NPT; P120°:249 kN; da:252.412 mm;

H2:95.25 mm; P60°:423 kN; A2:304.8 mm; H:474.663 mm; J1:133.35 mm; Stabilizing ring:SR-44-38; RG:1 NPT; R1:130.175 mm; h:80.963 mm; S:4.763 mm;

Mass shaft washer:3.45 kg; d1:190 mm; d:90 mm; B:20 mm; r1,2 min.:2.1 mm;

Mass inner ring:2.41 kg; B:50 mm; d:190 mm; F:210 mm; r, r1,2 min.:1.5 mm;

Basic Static Radial Load Rating Co:200000 N; Grease Speed Rating Open/Shielded n1:2600 rpm; Accessories:Two Shields; D:210.0000 mm; Basic Dynamic Radial Load Rating C:190000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; d:85.000 mm; B:52.00 mm; Fillet Radius ra:3.00 mm;

da max.:201 mm; s1 max.:31.2 mm; Misalignment factor k1:0.093; Fatigue load limit Pu:114 kN; B4:23 mm; Ca min.:-7.5 mm; Operating clearance factor k2:0.122; Da min.:216 mm; Reference speed:2400 r/min; B:93 mm;